Adhesives

Chemicals

Frames

Misc Supplies

Mesh

Murakami Emulsions

Ulano Products

Wilflex Inks

Modifiers
Reducer #11 (3-5% by weight maximum)
Curable Reducer

Wash Up
Conventional solvents or Bio-degradable Chemicals.

Make your own Film Positives for under $2

Fast Fusion
Light Color Garments

Wilflex MCV-FF Plastisol Ink

WILFLEX MCV-FF is a vinyl plastisol printing ink especially formulated to fuse and cure at lower temperatures than other plastisol inks. MCV-FF is suitable for light or pastel garments and is not recommended for dark fabrics. MCV-FF is ideal for printing on heat sensitive or stretch fabrics. MCV-FF has similar characteristics to SSV-FF but with lower opacity and higher gloss.

Recommended Substrates
Cotton, cotton blends, polyester, acrylics, lycra and spandex, some nylon (generally open weave or mesh type) as well as other synthetic materials. Preprint and test all fabrics for dye migration, bleeding, ink adhesion, wash fastness, tensile strength and other desired properties. Coated transfer paper is recommended to produce conventional transfers. Note: MCV-FF inks contain plasticizers which may cause deformation of certain plastic clothes hangers.

Printing Recommendations

Mesh
74-110T for mat printing.
140-305 for detailed

Squeegee- 70 Durometer, slightly.rounded blade.

Emulsion- Conventional direct or capillary films.

Curing
Full Cure- 270 degrees Fahrenheit/132 degrees Celsius.
Flashcure- 180 degrees Fahrenheit/82 degrees Celsius.