Adhesives

Chemicals

Frames

Misc Supplies

Mesh

Murakami Emulsions

Ulano Products

Wilflex Inks

Modifiers
Reducer #1 (maximum 3% by weight). Soft Hand Clear Caution: Excessive modification will impair puff.

Wash Up
Conventional solvents or Bio-degradable Chemicals.

Make your own Film Positives for under $2

Very Durable Puff
Easy to Print

Wilflex NuPuff Plastisol Ink

General Description
Wilflex Nupuff is a vinyl plastisol puff ink formulated to give a puff or raised effect of similar water-based products. Nupuff is superior to waterbased products in its durability and resistance to overblown coupled with the plastisol advantage of not drying in the screen. Nupuff offers excellent durability and tensile strength.

Recommended Substrates
Cotton, cotton blends, polyesters and other synthetics. Preprint and test all fabrics for dye-bleeding, ink adhesion, wash fastness and other desired characteristics.

Printing Recommendations

Mesh
Large print areas 6OT-86T.
For fine detail, 95-120.

Squeegee- Soft Durometer

Emulsion-Conventional direct or capillary films

Curing
Gel or flashcure- 220 degrees Fahrenheit/104 degrees Celsius. Full Cure- 320 degrees Fahrenheit/160 degrees Celsius.
Because Nupuff will expand before it is totally cured, caution should be used to achieve proper cure. Failure to cure ink properly causes poor wash fastness and poor adhesion.