Ulano Fabric Preparation Products
Ulano No. 2 Microgrit - An inert, abrasive powder that mechanically
roughens or abrades nylon and polyester. Roughening increases the surface
area of synthetic fabrics for a better mechanical bond with indirect
films and direct emulsions; for better fabric water retention for the
adhering of CDF direct-films; and for extended stencil life with any
stencil system.
Ulano No. 3 Screen Degreaser Liquid &
Ulano No. 33 Screen Degreaser Concentrate
A degreaser solution that removes dirt, dust and oils from all fabrics,
new and used. Degreasing should be considered a first step in stencil-making,
as it greatly reduces the risk of stencil-making failure, extends on-press
stencil longevity, and alleviates pinholing. Ulano No. 3 is ready-to-use--no
mixing. Degreases effectively in hard water. Rinses clean with hot or
cold water.
Ulano gel 23 Roughening/Degreasing Gel
An abrasive degreaser gel that combines the actions of Ulano No. 2 and
Ulano No. 3 The abrading action of Ulanogel 23 promotes better wetting
of the fabric and adhesion of the stencil, and thus, longer press life.
Its degreasing action removes dirt, dust, and oils from the fabric,
reducing the risk of stencil failure and pinholing.
Ulano No. 25 All Mesh Prep
A ready-to-use liquid mordant that promotes fabric water retention and,
thus, the uniform adhesion of all Direct Films. All Mesh Prep is especially
helpful for use with thin Direct Films applied to fine fabric, which
inherently holds little water. No. 25 rinses easily from the screen
with hot or cold water. Non-caustic - will not harm frames, fabric,
or adhesives on stretch and glue frames. Recommended for use with all
Direct Films. Do not use on natural silk.
|
